Emergency help needed
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Alright. Just found a pinched hose. Hoping it doesnt cost me big time. It connects to the plenum on the left side closest to the firewall. There's a tag on it by a pressure release valve that says "evap service port psi maximum regulated pressure only". It's rubber coated metal and looks like a mini spark plug wire. Could anyone tell me what it is, what it does, and if I'm screwed? Thanks ![Icon Doh](https://blazerforum.com/forum/images/smilies/icon_doh.gif)
![Icon Doh](https://blazerforum.com/forum/images/smilies/icon_doh.gif)
![Icon Doh](https://blazerforum.com/forum/images/smilies/icon_doh.gif)
Ok...now this is getting fun. Now the CSFI wont connect. There's 2-3 millimeters still too far below the top of the plenum so it wont click into place. Annnny help would really be appreciated. I'm getting frustrated with this. It seems nothing is falling into place like in theory, it should.
![Icon Doh](https://blazerforum.com/forum/images/smilies/icon_doh.gif)
![Icon Doh](https://blazerforum.com/forum/images/smilies/icon_doh.gif)
![Icon Doh](https://blazerforum.com/forum/images/smilies/icon_doh.gif)
Ok...now this is getting fun. Now the CSFI wont connect. There's 2-3 millimeters still too far below the top of the plenum so it wont click into place. Annnny help would really be appreciated. I'm getting frustrated with this. It seems nothing is falling into place like in theory, it should.
Last edited by Little Roober; 10-29-2011 at 08:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
sixvictor1
2nd Generation S-series (1995-2005) Tech
18
10-10-2012 02:53 PM