OK so this Friday im going to tackle replacing the CPI, fuel pres. regulator, fuel injector wire harness (good idea from that post sry op don't member who) fuel lines (nutkit as some posts call it) and plenum gasket of course. i know this isnt a hard thing to do as ive had it all apart except taking out the fuel lines from the lower intake is there anything special i need to take them off and install the new ones...ive already done a fuel pump and filter and a complete tuneup and some seafoam in the plenum for carbon and will be doing some in the oil when i go to change the oil....next will be that 2 inch lift kit and new front fenders and hood......