firing order
#1
firing order
I have a 1984 2.8 v6 4 x 4 that is carburated. On the distributor cap I know where number 1 piston fires from and that it turns clockwise does the wires follow suit with the next one going clockwise number 2, 3, 4, 5, and 6? Also does anybody know what size the water pump bolts are? I am missing the bottom two on the right side and what size the bolts are that hold the alternator bracket to the head? Thanks!
#2
RE: firing order
I believe the firing order is 1,6,5,4,3,2.
Not sure about the bolts. You may ahve to call the dealer and get the right ones.
Not sure about the bolts. You may ahve to call the dealer and get the right ones.
#3
RE: firing order
Is it then 1, 6, 5, 4, 3, 2 on the distributor cap in a clockwise order? Thanks
#4
RE: firing order
Per Autozone.com under Repair Info:
Code:
Firing order 1-2-3-4-5-6 ------- front | 1 3 5 | of | | Distributor rotates clockwise vehicle | 2 4 6 | -------
#6
RE: firing order
Thanks for the correction Kyle.
Thread
Thread Starter
Forum
Replies
Last Post
USMaverick101
General Tech Help
4
10-20-2006 06:46 PM
Rahmir
1st Generation S-series (1983-1994) Tech
1
08-16-2005 12:52 PM