Starting and check engine problems. Help!
#1
Beginning Member
Thread Starter
Join Date: Dec 2009
Location: Hemet CA
Posts: 11

i have a 96 s-10 blazer 4x4 and it has 4 codes. p0102, p0103, p0171, p0300. 1st mass or volume air flow circuit low input, 2nd mass or volume air flow circuit high input,3rd system too lean (bank 1), random misfire detected. it has a starting problem, when u go to start it no matter what time or how long it has been sitting or anything it take many cranks to finally get it to start and when it does it is weak for 5 seconds or so then it goes to normal idle. ive been thinking it might be o2 sensors but ive been reading around on here and ive been thinking other wise. please help me asap i have to get it smogged for my reg.
Thread
Thread Starter
Forum
Replies
Last Post
Dave884x4
1st Generation S-series (1983-1994) Tech
1
08-24-2013 02:29 AM
zombiewoof
2nd Generation S-series (1995-2005) Tech
8
02-01-2009 12:06 PM
Tony H
2nd Generation S-series (1995-2005) Tech
6
12-14-2008 02:04 AM
Deezy
2nd Generation S-series (1995-2005) Tech
1
10-25-2007 08:58 PM
DBlaser_ca
2nd Generation S-series (1995-2005) Tech
7
08-02-2007 04:44 PM







