Temporarily disable 4WD
#11
If your front axle was engaged all the time, you were basically doing the same thing as everybody who swaps in a one-piece Bravada axle shaft, and I've never heard of any of them having binding issues when turning in 2WD.
#12
Well that's just it, the dash button was set to 2WD but vacuum was being applied to the diaphragm, so to some degree or another I was getting engagement. This was not an AWD situation, I recognized the feeling of wheel hop due to the front wheels not traveling the same distance when turning so I kept it to minimum but that's not good to do on dry pavement even in a straight line so hopefully I'll be ok.
Thread
Thread Starter
Forum
Replies
Last Post