1983 K5 rocker panels
#1
1983 K5 rocker panels
Wasn't positive where to post this, so mods feel free to move if in the wrong section.
The rockers are rusted pretty bad in my k5. I am planning to cut them out and replace them with 3x3 square tubing. It is 3/16 thick. I want to fully weld it to the body the weld cross peices over to the frame. It will kill two birds with one stone, my rockers will be replaced and i will have rock sliders for my off-roading. Does anyone see any problems with this and does anyone have pics of it being done?
The rockers are rusted pretty bad in my k5. I am planning to cut them out and replace them with 3x3 square tubing. It is 3/16 thick. I want to fully weld it to the body the weld cross peices over to the frame. It will kill two birds with one stone, my rockers will be replaced and i will have rock sliders for my off-roading. Does anyone see any problems with this and does anyone have pics of it being done?
Thread
Thread Starter
Forum
Replies
Last Post
Diablo1982
Paint, Body, & Interior
3
02-27-2011 07:38 AM
Hooligan
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
10
02-09-2010 09:46 AM