Just passing on what i learned with a noise
#1
Just passing on what i learned with a noise
So I was messing with my TBI unit and removed/reinstalled my fuel lines. After I finished I started up the engine and had a funny noise from inside, sounded like a heater blower motor rubbing on something, VERY loud and annoying inside. After running it for a couple of days and listening to how the noise changed when I revved the motor or when it shifted, I figured I would look closely at the fuel lines and found that one of the lines was hitting a seam directly above the front driveshaft in the transmission tunnel. Hope this may help someone that is being driven mad by this noise. It drove me crazy....
Thread
Thread Starter
Forum
Replies
Last Post
Silver00LT
The Lounge
12
10-04-2010 10:33 PM
AlaskanK5
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
11
01-16-2010 02:48 AM