4L60E It’s SUPPOSEDLY NEW!!
#4
You are very welcome. I thought it might be of interest to people. You can tell the guy knows his way around a 4L60E by how quickly and confidently he goes about the teardown!
#7
Mine was rebuilt in town by a local shop. It is a smaller city, 25,000, so I'm hoping reputation matters to them. :-)
The owner made me promise to remember to never tow my boat in overdrive like I had.
I also Installed an OBD-II transmission temperature gauge.
#8
Ditto!
Mine was rebuilt in town by a local shop. It is a smaller city, 25,000, so I'm hoping reputation matters to them. :-)
The owner made me promise to remember to never tow my boat in overdrive like I had.
I also Installed an OBD-II transmission temperature gauge.
Mine was rebuilt in town by a local shop. It is a smaller city, 25,000, so I'm hoping reputation matters to them. :-)
The owner made me promise to remember to never tow my boat in overdrive like I had.
I also Installed an OBD-II transmission temperature gauge.
#9
UltraGauge, OBD II Scan Tool & Information Center
#10
On my 4L60E trans, there is a port on the side of the trans for a sensor to be installed. I could not get this plug out. It was as though red Loc tite was used in the installation from the factory.
Thread
Thread Starter
Forum
Replies
Last Post
95blazer8620
2nd Generation S-series (1995-2005) Tech
1
10-19-2007 01:26 PM