ABS module - tip to not replace!
Thread Starter
|
Starting Member
Joined: Apr 2021
Posts: 5
ABS module - tip to not replace!
So my ABS had gone out last year, light on ......
Rather than jumping right into a new replacement, I opened it up and took a look at the solder joints. While nothing popped right out at me, I pulled out my soldering iron and just went around the joints to freshen them up. Sealed the lid back on with RTV and viola! Works like a champ, well over a year now.
Rather than jumping right into a new replacement, I opened it up and took a look at the solder joints. While nothing popped right out at me, I pulled out my soldering iron and just went around the joints to freshen them up. Sealed the lid back on with RTV and viola! Works like a champ, well over a year now.
Thread
Thread Starter
Forum
Replies
Last Post