List Your Future Mods
#11
Join Date: Aug 2007
Location:
Posts: 72

My Mod is to make mine disappear :-(
#12
Join Date: Jul 2007
Location:
Posts: 127

ordering sometime this week the following:
pro comp series 97 black steel wheels 15"x7" 4.5 backspacing
31" maybe 32" bfg mud terrains
2" body lift
1.5" daystar shackles
add a leaf kit
after that i will be do these mods:
building my own baja inspired roof rack with spare tire mount gas/water jugs hi-lift mount and axe/shovel mount with 5 lights on the front 2reverse lights on the back and a spot lightwith cargo space to spare.
nerf bar or whole new front bumper havent decided with winch mount and 2 light mounts
possible a rear bumper
slider bars
reciever tubes with shackles
and in between all this i will probally also get:
K&N cai
flowmaster super 44 off road muffler
and way later down the road:
chop the **** out of it to make room for frame modifications to accept long travel suspension
build some custom long a arms
do a rear axle swap and customize it for long travel
fox long travel gas shocks
roll cage
do a full snorkel kit
strip the interior (or a lot of it)
all of this will be over a VERY long period of time. im not expecting to get the long travel custom stuff done for atleast a few years.
pro comp series 97 black steel wheels 15"x7" 4.5 backspacing
31" maybe 32" bfg mud terrains
2" body lift
1.5" daystar shackles
add a leaf kit
after that i will be do these mods:
building my own baja inspired roof rack with spare tire mount gas/water jugs hi-lift mount and axe/shovel mount with 5 lights on the front 2reverse lights on the back and a spot lightwith cargo space to spare.
nerf bar or whole new front bumper havent decided with winch mount and 2 light mounts
possible a rear bumper
slider bars
reciever tubes with shackles
and in between all this i will probally also get:
K&N cai
flowmaster super 44 off road muffler
and way later down the road:
chop the **** out of it to make room for frame modifications to accept long travel suspension
build some custom long a arms
do a rear axle swap and customize it for long travel
fox long travel gas shocks
roll cage
do a full snorkel kit
strip the interior (or a lot of it)
all of this will be over a VERY long period of time. im not expecting to get the long travel custom stuff done for atleast a few years.
#13
Junior Member
Join Date: Dec 2006
Location:
Posts: 497

Within the next year:
-Switch 2" BL to 3" BL
-Get shorter shackles and do a SOA in the rear
-Hidden rear winch (Smittybilt XRC8, already purchased)
-Rock Sliders
-DVD player
-H3 seats (maybe)
-Switch 2" BL to 3" BL
-Get shorter shackles and do a SOA in the rear
-Hidden rear winch (Smittybilt XRC8, already purchased)
-Rock Sliders
-DVD player
-H3 seats (maybe)
#14
Join Date: Jan 2007
Posts: 75

bug shield, window vents, hidden hitch, custom hitch cover, and ranchos all around
#15
New Member
Join Date: Jun 2007
Posts: 78

Within the next month or two:
Install ProComp 9000 shocks
New ball joints upper/lower on both sides
Poly bushings on all the front end
2in body lift
31x10.5 Maxxis buckshot mudders
Within the next 6 months or so:
semi cheap paint job...might just prep it myself and let macco spray it.
I want to remove the carpet interior and replace it with vynil interior out of a junkyard blazer, if I can get my hands on leather seats I will upgrade to those as well...and pretty much everything else I can rip out of one that was fully loaded.
Also need to redo my exhaust soon so I may stuck a flowmaster 40 on it...i may do that sooner...not sure
Install ProComp 9000 shocks
New ball joints upper/lower on both sides
Poly bushings on all the front end
2in body lift
31x10.5 Maxxis buckshot mudders
Within the next 6 months or so:
semi cheap paint job...might just prep it myself and let macco spray it.
I want to remove the carpet interior and replace it with vynil interior out of a junkyard blazer, if I can get my hands on leather seats I will upgrade to those as well...and pretty much everything else I can rip out of one that was fully loaded.
Also need to redo my exhaust soon so I may stuck a flowmaster 40 on it...i may do that sooner...not sure
#16
BF Veteran
Join Date: Jan 2007
Location: GP AB CA
Posts: 3,946



ORIGINAL: Jigg
Within the next year:
-Switch 2" BL to 3" BL
-Get shorter shackles and do a SOA in the rear
-Hidden rear winch (Smittybilt XRC8, already purchased)
-Rock Sliders
-DVD player
-H3 seats (maybe)
Within the next year:
-Switch 2" BL to 3" BL
-Get shorter shackles and do a SOA in the rear
-Hidden rear winch (Smittybilt XRC8, already purchased)
-Rock Sliders
-DVD player
-H3 seats (maybe)
As for me... It'll take me awhile, because I need oodles of cash, lol, but, here goes:
5.3L V8 swap
T-56 transmission swap, if mine bites the bullet behind the 5.3
Heavy duty clutch when mine burns out from towing more than 3,900 lbs...
6" superlift
2" or 3" body lift
waiting for instructions and/or a kit for a hidden winch on the front of the rig (hint hint Jigg, LOL)
possible solid axle up front, if I get a purdy daily driver while the V8 gets ready to be put in (probably easier to do with the engine out, lol)
power windows and power locks
cruise control
and other stuff I haven't thought of or can't remember right now...
#17
Okay, lets see
-2" spacers in the back and 1.25" in the front
-Pilot driving lights across roof rack
-Chrome grille inserts
-Chrome gas door
-Chrome door handles
-red neon behind front grille
-change interior lights to red led's
-billet ac *****
-paint frame rails
-sand and repaint hitch
-vinyl dash kit for small panels in red
-carbon fiber overlay for large dash panel
-carbon fiber halo headlights (maybe)
-carbon fiber custom switch panel in place of cd holder with red led switches
-carbon fiber overlay for overhead console
-new lift supports for back gate
-stainless steel overlay for 3rd brake light (gotta find website again)
-chrome exhaust tip
-full pioneer system (2 10" subs-1000 watt amp-cap-neons-and strobes, with carbon fiber accents)
-sand and repaint roof rack
-red underbody neons
Okay, I think taht's it. Now I have to just get some cash to pay for all this stuff
-2" spacers in the back and 1.25" in the front
-Pilot driving lights across roof rack
-Chrome grille inserts
-Chrome gas door
-Chrome door handles
-red neon behind front grille
-change interior lights to red led's
-billet ac *****
-paint frame rails
-sand and repaint hitch
-vinyl dash kit for small panels in red
-carbon fiber overlay for large dash panel
-carbon fiber halo headlights (maybe)
-carbon fiber custom switch panel in place of cd holder with red led switches
-carbon fiber overlay for overhead console
-new lift supports for back gate
-stainless steel overlay for 3rd brake light (gotta find website again)
-chrome exhaust tip
-full pioneer system (2 10" subs-1000 watt amp-cap-neons-and strobes, with carbon fiber accents)
-sand and repaint roof rack
-red underbody neons
Okay, I think taht's it. Now I have to just get some cash to pay for all this stuff
#18
Junior Member
Join Date: Dec 2006
Location:
Posts: 497

ORIGINAL: drperry
Are the H3 seats the same as the Canyon/Colorado seats? If they are, it'd be worth the swap... those things are comfortable!
Are the H3 seats the same as the Canyon/Colorado seats? If they are, it'd be worth the swap... those things are comfortable!
):
#19
Join Date: Oct 2007
Location:
Posts: 908

I plan on doing a cheap lift by adjusting the t-bars, and putting blocks in the back
I wanna get a light rack/luggage rack for the roof and fabricate
a tire rack to go with it
30 in tires on black wheels.
I wanna get a light rack/luggage rack for the roof and fabricate
a tire rack to go with it
30 in tires on black wheels.
#20
Join Date: Oct 2007
Location:
Posts: 908

Cherrybomb glasspack muffler
leather interior
leather interior





