looking for shackles for a 99 4x4 blazer
Beginning Member
Joined: Dec 2009
Posts: 18
From: NC, Iraq, Back-And-forth
you can fabricate your own with a grinder or sawzall, a drill, and a 3/4" bit. Just use steel that is at least 1/4" thick. Also, leave a good amount of space between the holes and the edge of the steel (about 3/4")
Thread
Thread Starter
Forum
Replies
Last Post
COUNTRYBOY061488
New Member Area
5
Aug 28, 2008 07:54 PM
GMdesigner
Lifting Tech
6
Nov 16, 2007 05:05 PM
