ABS light?
#11
RE: ABS light?
well, here is something wierd.... I started up the wife's blazer when I got home from work. It had not been moved all day. I started it, let it idle for a bit. All the dash warnings went off. I moved it from one side of the parking lot to the other so it was closer to the entrance, and the ABS light did not come on at all......
hmm.....
hmm.....
#12
RE: ABS light?
Could have been a chunk of dirt on the sensor, and when it dried the dirt fell off. Just a guess.
#13
RE: ABS light?
If you have a multimeter that can measure resistance, hook up the terminals and test the resistance. If one of the sensors are blown, most likely it will read "0" resistance.
#14
RE: ABS light?
ORIGINAL: sonicnofadz
If you have a multimeter that can measure resistance, hook up the terminals and test the resistance. If one of the sensors are blown, most likely it will read "0" resistance.
If you have a multimeter that can measure resistance, hook up the terminals and test the resistance. If one of the sensors are blown, most likely it will read "0" resistance.
ORIGINAL: 4lowlife
Check the ohmatic value of both wheel bearing wires. I don't know their supposed values. It help to find if one has a wildly different value than the other.
Check the ohmatic value of both wheel bearing wires. I don't know their supposed values. It help to find if one has a wildly different value than the other.
I know old thread and post but I think thats what 4lowlife was trying to say when he made up the word ohmatic[&:]
#15
RE: ABS light?
There is no point in reviving a thread that is 8 months old.
Thread
Thread Starter
Forum
Replies
Last Post
Tinted
2nd Generation S-series (1995-2005) Tech
10
03-15-2012 02:56 PM
damageinc98
2nd Generation S-series (1995-2005) Tech
0
07-12-2010 10:47 PM
stormshadow1
2nd Generation S-series (1995-2005) Tech
1
04-23-2009 09:46 AM
95_Blazer
2nd Generation S-series (1995-2005) Tech
6
12-06-2007 09:44 AM
Deezy
2nd Generation S-series (1995-2005) Tech
1
10-25-2007 08:58 PM