1.5" Shackle Dimensions(PLZ HELP!)
#1
1.5" Shackle Dimensions(PLZ HELP!)
hello, yes i know there a couple fourms out there about this, but it has known of my answers.
i believe that it is 9" Long and 7" Hole to Hole i Believe...
PLEASE HELP
i believe that it is 9" Long and 7" Hole to Hole i Believe...
PLEASE HELP
#4
#5
okay now what is the hole size? i read on blazin Jason it is 9/16 but there was another fourm sayin something else (btw its A 97 blazer)
#6
We did our last set 9/16. So that should work as well
#7
okay thanks guys, i no you can use the stock nut and bolts but im getting new ones, i talked to GM they say the bolt length is 4 1/8" .. now is that correct?
Thanks Very Much
Thanks Very Much
#8
I'm not sure on the size. Inside shackle width will be 3" plus the thickness of your shackle material. Then allow enough extra thread for the nut to fully thread on.
#9
Ok i Built Them Thanks For Your Help
Heres some pictures
Heres some pictures
#10
Outside welds look OK but the inside ones look cold, some undercut & not welded at the right angle. I'll guess you welded the inside 1st?
Sorry but being a welder for 18 years, lead hand & always looking at QA (Quality Assurance) does this to me. lol
I'd think about trying to grind off some of that hump on the inner welds & rewelding them, for safety sake at least & then you can get rid of the spatter as well.
Looking good & should look great with a coat of paint or powder coating!
Sorry but being a welder for 18 years, lead hand & always looking at QA (Quality Assurance) does this to me. lol
I'd think about trying to grind off some of that hump on the inner welds & rewelding them, for safety sake at least & then you can get rid of the spatter as well.
Looking good & should look great with a coat of paint or powder coating!