Coil/Torsion Combo lift questions
Thread Starter
|
Starting Member
Joined: Dec 2007
Posts: 107
From: Northeastern Pennsylvania
Coil/Torsion Combo lift questions
Hi,
I have a 98 4dr Blazer LT and looking for about 3-4 inches of lift. I see all over about the torsion bar crank method of lifting, and I see 1.5" lift coil springs avaliable here and there, but I cannot find any information on a combo. Seeing as how I have replaced my drivers side ball joint every year for the last 3 years, I dont really want to crank the chit outta the torsion bar.
Has any one... or is it even possible/recommended... to put 1.5" coils AND crank the torsion bar a little? Would there be any adverse effects to this route such as increased wear (like if I cranked the torsion to the max) ?
I have a 98 4dr Blazer LT and looking for about 3-4 inches of lift. I see all over about the torsion bar crank method of lifting, and I see 1.5" lift coil springs avaliable here and there, but I cannot find any information on a combo. Seeing as how I have replaced my drivers side ball joint every year for the last 3 years, I dont really want to crank the chit outta the torsion bar.
Has any one... or is it even possible/recommended... to put 1.5" coils AND crank the torsion bar a little? Would there be any adverse effects to this route such as increased wear (like if I cranked the torsion to the max) ?
Thread
Thread Starter
Forum
Replies
Last Post
Lancealot
2nd Generation S-series (1995-2005) Tech
8
Feb 22, 2011 07:34 AM
