Random question
#1
Random question
So not sure how many people read my thread that I have done my t bar crank but I am very confused I measured the gap between the top of the tire and the fender and on both front tires it is a 7" gap right on the button and on the rear it is 5 5-1/2" somewhere around there anyways I also measured from the body line that goes all the way down the side and it measures 39 1/2" tall front and back yet I have a 2" bigger gap on the front so why is it measuring the same height?
#2
Would that mean you lifted the front with the crank, but the back is lower because you didn't put in shackles?
#3
sorry for being confusing I meant to say that it is cranked 2 1/4" on one side and 2" on the other ( the front ) and I am wondering if that will hold up for a couple months or if I should just reset the t bars and wait until I can get my shackles and an alignment
Thread
Thread Starter
Forum
Replies
Last Post
Mitch14290
2nd Generation S-series (1995-2005) Tech
1
12-05-2011 11:11 PM
TheStampedOctagon
1st Generation S-series (1983-1994) Tech
16
10-11-2011 12:24 AM