2” body lifts are available for 84-04 S-10’s and 3” body lifts are available 84-94 S10’s and one company makes 3” body lifts for S-10’s up to 97 and this kit can be modified to work on late model S-10’s as well.


What company makes the 3" for up to 1997? Please let me know, i want a body lift, but im not gonna waste my effort on just 2".

Could i modify it to work with my 1997 Chevrolet Blazer 4 door? Any knowledge on this subject is most appreciated.

most people that have a 3" BL on 2nd gens piece them together

Oh yeah, great idea. Any idea whether or not i need to modify anything to get it to fit?

dont think so

i think you will have to extend some of the grounds. not sure though. I know a few people on here have done it.

Just a small addition found this body lift on accident and bought it myself will update this as soon as I get it installed but didnt see it listed above, 3" body lift from summit racing note: kit does NOT include bumper relocation brackets but everything else seems to be supplied cant go wrong for $61 imo.

Outsydr, you do realize you will have a 3' gap between your body and the bumpers unless you can fab up some brackets, right?

brackets are already made wanted those done before i even began the body lift (my buddy has a 93 s10 blazer 4x4 with no front clip or bumpers on it atm) so used that for measurements and test fitting.

ive been trying to find a good website for body lift installations with no success. What modifications are necesary for installing a body lift, it cant be as simple as mounting spacers under the body mounts? what about steering etc. is there a website that anyone knows of i found one for the silverado only.

Try this One. Yes it really as simple as putting in spacers and brackets to relocate the bumpers the only thing I had to modify for my 3" BL was moving the vacuum actuator the 4wd a bit lower and made the wires to the fuel sender/pump at the gas tank a bit longer.