So I've been trying to convert all of my marker, turn, and tail lights to LED. The problem I'm having is that I can get them all to blink, but the left side dash indicator stays on and if I try to use the hazards all but the front left blink unless I put the multi-switch to indicate that I'm turning left, then all of the lights will blink correctly. Any ideas on what I could try, I've already got a 50W 6 Ohm resistor on the front left blinker and that did not solve the issue. I also have 25W 6 Ohm resistors I could put on the marker light but since the one for the front flasher didn't help I figured I'd ask and see if someone else has a better idea.