Aiming Headlights 2001 Blazer
Thread Starter
|
New Member
Joined: Oct 2014
Posts: 2
Aiming Headlights 2001 Blazer
In the process of aiming my headlights, I discovered I do not have enough adjustment on the right side.
The adjustment screw has not more travel, and the headlight needs to go to the right just a little more.
Has anybody come accross this problem?
The adjustment screw has not more travel, and the headlight needs to go to the right just a little more.
Has anybody come accross this problem?
Beginning Member
Joined: Aug 2023
Posts: 27
From: FL
I just installed new headlight assemblies on my 04 blazer, using the ones on rockauto. (GM part number, made by Eagle Eyes)
Mine had plenty of adjustment. The first thing I would check is to make sure the 2 tabs on the bottom of the headlight are correctly seated. You might have 1 seated and 1 not seated, which would make it crooked.
Mine had plenty of adjustment. The first thing I would check is to make sure the 2 tabs on the bottom of the headlight are correctly seated. You might have 1 seated and 1 not seated, which would make it crooked.
BF Guru
Joined: Dec 2016
Posts: 5,603
From: Moscow, ID
I just installed new headlight assemblies on my 04 blazer, using the ones on rockauto. (GM part number, made by Eagle Eyes)
Mine had plenty of adjustment. The first thing I would check is to make sure the 2 tabs on the bottom of the headlight are correctly seated. You might have 1 seated and 1 not seated, which would make it crooked.
Mine had plenty of adjustment. The first thing I would check is to make sure the 2 tabs on the bottom of the headlight are correctly seated. You might have 1 seated and 1 not seated, which would make it crooked.
Thread
Thread Starter
Forum
Replies
Last Post
