Hi
Thread Starter
|
Starting Member
Joined: Aug 2013
Posts: 1
Hi
Hi everyone my names Tanner and I'm new to this whole forum thing but everyone's telling me its a good thing to get into, anyways i have an 01 blazer and I'm currently debadging it, what's the easyest way to remove badges without damaging the pain
Saw em off with fishing line or floss, then use WD40 or GooGone to help rub off the sticky crap left over. Some people use the 3M eraser wheel in a drill to remove the gummy stuff too.
Welcome to the gang, and yes, forums are the best way to get help and will save you tons of repair bills if you have some simple tools. There is alot of combined knowledge in here from our members.
Welcome to the gang, and yes, forums are the best way to get help and will save you tons of repair bills if you have some simple tools. There is alot of combined knowledge in here from our members.
Welcome Tanner! Here's the best advice I can give you: just do whatever Cap'n Hook says. He has vast amounts of knowledge about Blazers and he's willing to share!
Also, buy a fuel pressure tester. Trust me; you'll need it eventually.
Also, buy a fuel pressure tester. Trust me; you'll need it eventually.
