The ol crank but no run
#1
The ol crank but no run
Ol cranks but won't start I am new and just purchased a 1994 Chevy Blazer S10 4.3 I believe. I have a good strong battery and plenty of fuel. On the recommendation of the previous owner I replaced fuel tank had a hole in it and the fuel pump. The engine cranks but will not run unless I put fuel right to the intake. Burns that fuel and died. Like I said I'm new to forums and stuff I'm 60 I consider myself a fair shade tree mech. As in I know how an internal combustion engine works lol
sorry it's 4x4 auto standard factory issue if I can get you any more info that will help just ask. Thanks any help would be appreciated
sorry it's 4x4 auto standard factory issue if I can get you any more info that will help just ask. Thanks any help would be appreciated
Last edited by Thomas60; 04-26-2023 at 10:40 PM. Reason: Additional
#2
There is a "sticky" thread that covers the crank/no-start situation.
It sounds like a fuel problem. A standard thing to check on the Blazers is the fuel pressure in the supply line immediately before it enters the engine. There are specs for what the pressure should be and for how long it should stay high.
It sounds like a fuel problem. A standard thing to check on the Blazers is the fuel pressure in the supply line immediately before it enters the engine. There are specs for what the pressure should be and for how long it should stay high.
Thread
Thread Starter
Forum
Replies
Last Post
tolbertsandy
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
8
09-02-2011 04:00 PM
Regan
1st Generation S-series (1983-1994) Tech
3
05-08-2010 02:36 PM