dude u can just pull the whole grille assembly off on the newer models. dont need to pull the headlights off. trust me. i did it when i shaved a peice off my clear corners just pull the assembly! lol

 

95 Blazer with sealed headlights you just remove the two torx screws and the corner pops out, untwist the bulb assembly, remove clear bulb, install amber bulb, pop clear corner in, put screws back in. Shouldnt take much more than 10-15 minutes. I got mine for $30, but that was a few years back, theyre much cheaper now.

 

for the newer blazers (which you have by your picture), just pull the grill off

you may have to pull hard but don't pull it too far so you don't pull out the wiring on the bulbs,
2. take the bulbs out of the corners lights (very easy, just turn to the side then pull),
3. pull the corners out of the grill
4. put new corners in
5. and definitely get some silverstar bulbs, otherwise the amber from the bulb casing shows through on the clear corner, with the silverstars the bulb is chrome so you can't see it (check out my gallery if you want a looksee)

to reassembly, just put everything back where it came from

 

oh and i forgot

ebay is the best way to get all of this stuff

i got my clear corners for 27$ shipped

 

just a question but why was this posted in the Audio/Visual Electronics section and not Apperance or General Tech?

 

Quick answer... Because it wasn't moved back in 2005...

 

PAH HAHAHAHAHA WOW

Ok i feal dumb for giving advice now

 

BRILLIANT!!!! lol

 

nah mine headlight and clear corner is one entire piece. I've read about the oven trick but have been reluctant to try it, just was wondering if there was another way.