Driver Door hinge bent?
#1
01-15-2012, 10:59 PM
Driver Door hinge bent?
I just bought a 2002 ZR2 yesterday, and one of the biggest things about it that is bugging me right now is that the driver door seems to be bent at the hinges or something I'm not quite sure.
It really isn't a big deal but its noticeable. I mean it closes completely and opens fine
When I open the door it drops slightly (i haven't measured the drop yet I can do that tommrow if anyone wants to know.)
When I close the door you can tell it lifts up a little when you close it shut.
When i was driving on the interstate back home after i bought it i could hear the wind through the door edges and a slight breeze on my feet.
anyone ever had a problem like this even with another vehicle?
It really isn't a big deal but its noticeable. I mean it closes completely and opens fine
When I open the door it drops slightly (i haven't measured the drop yet I can do that tommrow if anyone wants to know.)
When I close the door you can tell it lifts up a little when you close it shut.
When i was driving on the interstate back home after i bought it i could hear the wind through the door edges and a slight breeze on my feet.
anyone ever had a problem like this even with another vehicle?
#2
01-16-2012, 07:56 AM
hinge pins and bushings... easy fix.. unless the holes are egg shaped
http://www.youtube.com/watch?v=dvsIHQJIuxY
http://www.youtube.com/watch?v=dvsIHQJIuxY
Last edited by coolasice; 01-16-2012 at 08:00 AM.
#3
01-16-2012, 08:21 AM
I have the same problem with mine...even right after I changed out the pins/bushings. The hinge is...egged. 
#4
01-16-2012, 08:29 AM
Originally Posted by Little Roober
I have the same problem with mine...even right after I changed out the pins/bushings. The hinge is...egged.
https://blazerforum.com/forum/2nd-ge...jb-weld-20774/
Thread
Thread Starter
Forum
Replies
Last Post
