LED mod
#11
there is no direct fit except for the dome lights. everything else is custom made by each person. if you read what oktain said then you'll see what you need
#12
So far all I've done is the instrument cluster.
#13
ok, so after looking around and what not for a better way to led swap my interior... i came across a thread on s10forums and from what i understand they used the T1.5 bulb type from Superbrightleds.com... now, i'm willing to spend the $11 bucks and send a couple to my house and find out but... any ideas about how big the bulbs are for our window controls and such? i have 2 burnt out and if i'm replacing them, i might as well swap
sorry for the book
sorry for the book
#14
Which LED mod on the MX6 did you do? Reason I ask if there was several on MX6.com.
#15
i wonder why Pat hasn't done this to Sadie yet?
#16
he claimed its a real pain in the *** to do on his truck haha. its not as easy to take the dash apart or something
#17
what kind of led lights would i need for my 2000 chevy blazer. i wanted red led..what # is needed. and do i need sockets or anything for the replacement lights to fit in or any way to get lights that fit in place of the old lights?
#18
Check the link in my sig. You will need sockets for the 6 dash lights. It's easiest to go to a junk yard and get them from fords or other cars to replace them.
#19
Can LED's be dimmed like incandescent? I'm sure there's a band of operating voltage, but is it wide enough to use the variable brightness control?
Not that I use that thing except deep in the mountains at night, but full bright LED's might be a bit much out in the country sometimes.
Not that I use that thing except deep in the mountains at night, but full bright LED's might be a bit much out in the country sometimes.
#20
Mine don't really dim very well. If you take the dimmer all the way down, they will turn off though.