Alright so I know you can wire them to the turn signals but I dunno what wires I should wire each to. Coming off the halo is a red and a white wire and on the turn signal there's a blue, brown, and black wire. I don't want it to flash with my turn signal I just want it to be lit up when i have my parking lights on. Any info on this would be greatly appreciated

 

The white will be grounded while the red goes with the brown wire I believe which will have them on when the parking lights are on, aka when you press the top switch but dont turn on your headlights.

 

So white to black and red to brown?

 

No, if you wire it that way it will blink because the black ground is weird, you have to ground it to the bare metal chassis.

 

What does this mean?

 

he means run it to a spot on the truck that is bare metal. there is a ground on pass side by battery, or just make your own with a sheet metal screw and fasten the wire to the body.

 

hmm okay ill try this out, thanks