before and after pics body lift, add a leaf and t-bar crank with 31's
#1
before and after pics body lift, add a leaf and t-bar crank with 31's
just figured i would post up a before and after pic of my jimmy after some mods over the last few weeks
2" pa body lift
2-3" pro comp add a leaf
2" torsion bar crank
31/10.50r15 artic claw winters (traded for case of beer)
Got some black steely d-windows on order at work, hope to get them soon
wish i had took some measurements of before and after.
before
after
2" pa body lift
2-3" pro comp add a leaf
2" torsion bar crank
31/10.50r15 artic claw winters (traded for case of beer)
Got some black steely d-windows on order at work, hope to get them soon
wish i had took some measurements of before and after.
before
after
#5
when you get your 32's , let me know how they fit. i was thinking going 32's but the 31's were free. so for now i will run the 31's. . thinking about picking up the rough country lift, so i can get the control arms, and possibly tuck a 33 under there with some trimming.
#9
they are cranked up pretty far. probably a few turns left on the bolt. but not much.
the add a leaf took about 10 minutes to install at work with a lift and air tools, but i also replaced the u-bolts while i was back there. i figured why not considering a local spring shop made up all 4 for about 20 bucks . the body lift i did at home in the drive way and pretty much spent all day , but i took my time, and enjoyed some beverages, but wasnt that hard. next step i think is going to be the rough country kit. but probably not till spring.
had a little bit of rubbing when i leaving my gf's apartment building parking lot this evening from the RF. pretty sure it was rubbing on the backside of the fender. hoping the steelies i ordered have the right backspacing so this wont happen.
the add a leaf took about 10 minutes to install at work with a lift and air tools, but i also replaced the u-bolts while i was back there. i figured why not considering a local spring shop made up all 4 for about 20 bucks . the body lift i did at home in the drive way and pretty much spent all day , but i took my time, and enjoyed some beverages, but wasnt that hard. next step i think is going to be the rough country kit. but probably not till spring.
had a little bit of rubbing when i leaving my gf's apartment building parking lot this evening from the RF. pretty sure it was rubbing on the backside of the fender. hoping the steelies i ordered have the right backspacing so this wont happen.
#10
when you get your 32's , let me know how they fit. i was thinking going 32's but the 31's were free. so for now i will run the 31's. . thinking about picking up the rough country lift, so i can get the control arms, and possibly tuck a 33 under there with some trimming.