Just got a stock 2001 Zr2 and Im looking at doing the torsion bar and shakle lift or adding the leaf. If you guys could post up pics of your Zr2 with a lift to give me an idea of what it looks like. Thank you

 

2inch body, 1.5 crank on the bars and 2inch shackles on 33's

 

2" BL, shackles and extra leaf to level out the back. 33x10.5 KM2's. Check my build thread if you want more pics.

 

2" shackles in the back to level it out. Still has stock 31" tires

 

Did u guys have to do any trimming to fit the 33s

 

2" Body lift
2" Lift keys
2" Short add a leaf
3" lift shackles
Roughly 4.5" of lift
Stock 31's for now til i can find some 33's

 

Yes, read my build thread

 

I really like the wheels on your car

I have 2000 Blazer ZR2 with stock wheels but i would like to put 15x7 or 15x8 Rock Crawler and i do not mind using the original31x10.5-15 tire dimension since the tires are wide enough for me

But i really like a bit of "lip" on the rims so any know which backspace i can use on a original ZR2 that will allow quite a bit "lip" on the rims like on the
15x7 AR Series D steel wheels with 4 inch backspace adds a bit lip
Se the first picture and the red arrow

 

Hey PlanB4x4

Your Truck looks Great !

Are you able to put your Spare Tire on with that HiLift Jack ?
And it looks Longer than the Width of your Truck ?

I want to add a 5 Gallon "Jerry Can" and Mount and a HiLift Jack on the Back of my Son's ZR-2.
I think I can Mount the Jack along the Bottom of the Spare Tire Carrier in front of the Spare Tire. Just Weld Brackets on where I need them, I will make them "Lockable" too.

Here is the Same Picture next to your Truck - Twins !
Timmy

 

@PlanB4x4

Made a profile on this forum just to compliment your Blazer. Man that thing is nice!!! (Currently a Colorado owner).