ok the 2000 blazer 4 door 4x4 4.3l I just did front pads and rotors but not sure if calipers are bad. braking is good . I don't seem to be dragging the pad on a sticky caliper but I seem to be pulling to the left more after the job .. so I jacked it up under the lower control arm to level out the drivetrain. for both front tires it takes two hands to spin to get it to turn about 1 turn with a good amount of force but I don't hear the pads dragging on the rotor really. Im more into jeeps so I don't know if this is stiff because im spinning this type of 4x4 system ??

 

*Moved to Steering, Suspension and Drivetrain*