2nd Gen. ZR2 suspension swaped onto 1st Gen?
#1
2nd Gen. ZR2 suspension swaped onto 1st Gen?
Can i swap the factory Zr2 suspension onto my '92 Blazer? I know you can swap them on 2nd Gens.
#2
From looking at the suspension set ups you might be able too they are both about the same set up and about the same size. But, maby someone that has a better idea can answer your question better.
#3
Most of the parts are the same on the 2.
The zr2 got it lift and width from a wider frame and lowered mounting points on the frame for the suspension parts. Swapping parts will not give you any lift at all.
The zr2 got it lift and width from a wider frame and lowered mounting points on the frame for the suspension parts. Swapping parts will not give you any lift at all.
Thread
Thread Starter
Forum
Replies
Last Post
NC93BLAZERLT
1st Generation S-series (1983-1994) Tech
4
11-23-2009 09:12 AM
old skool luvr
2nd Generation S-series (1995-2005) Tech
6
11-10-2009 09:20 PM