4wd lights
#1
4wd lights
After replacing the vacuum hoses and switches on my 91 S-10 blazer the front wheels are engaging, although a little rough but working. However the 4wd indicator lights are not. When I turn the it on there is no power to the lights. I did replace the switch where the actuator cable goes into the front differential and still nothing. One thing was that it would not tighten to where it was snug but kept turning. Is there any place else I can look to get the lights working.
Thread
Thread Starter
Forum
Replies
Last Post
BearingEater
2nd Generation S-series (1995-2005) Tech
2
06-17-2011 03:16 PM
LYK2ROC
2nd Generation S-series (1995-2005) Tech
1
12-05-2008 07:08 PM