95 blz 4x4 Front End Advice...
Issues...
Everything that goes wrong with this truck end up worse case scenario so here goes...
Front end is having issues. Popping, rattling, clunking, squeaking, if you can make the sound, it can make it better...
Sway bar is disconnected and hanging in the wind on the pass. side as the mounting bracket on the A arm has been ripped off. Talking to a welder about putting one back on...
When going down logging roads and lite off roading, I sometimes wonder if I am going to loose anything. You can really have an extensive conversation with the front end. I am not a suspension guy, so I am not really sure where to start. I am almost ready to buy a front end kit like: http://www.kanter.com/truck/trfek.html
and do the sledge hammer replacement, but can't really afford to. Any tips of where to start, or what to look for would be great. Also, if you have any preferred products or ones to stay away from...
If I do have to replace... everything, are there any upgrades I should save up for?
Sorry if I am too scatter brained in this post. It is the trucks fault. It made me like this!
Thanks in advance for your help.
Thread
Thread Starter
Forum
Replies
Last Post
ddog800
1st Generation S-series (1983-1994) Tech
14
Feb 16, 2011 03:01 PM
thercholic
Steering, Suspension & Drivetrain
4
Nov 11, 2010 10:19 PM
1BlazR
Audio/Video Electronics
3
Jan 20, 2006 10:00 AM





