96 blazer front end noise
#1
96 blazer front end noise
Hi all new here but I have a problem! I have a 96 blazer and I was coming home snow flying in 4 hi had been driving in for about an hour around 60 mph and the front end started making a whining noise that got louder the further I drove and i could feel it slowing down like it was dragging then all of a sudden it made a loud grinding noise followed by a loud clunk and now when I put it in 4 wheel the front end end makes a grinding noise but it seems to be slipping.Im thinking it might be a bad cv but not sure any help or suggestions would be helpful. All ball joints and hubs are new. Thanks in advance Dean. It also has 229000 miles on it.
#2
somebody has to have at least an Idea
#3
Yep, lots of ideas available via the search function. How about a little patience man!
Here's a few that will give you some ideas:
4x4 No Worky.... Maybe this will help....
4wd Front Axle Clicking When in 2HI - Goes Away when in 4HI/4LO
Here's a few that will give you some ideas:
4x4 No Worky.... Maybe this will help....
4wd Front Axle Clicking When in 2HI - Goes Away when in 4HI/4LO
Thread
Thread Starter
Forum
Replies
Last Post
bam_9_9_9
1st Generation S-series (1983-1994) Tech
24
12-28-2010 07:58 PM
changeme20
Steering, Suspension & Drivetrain
3
05-01-2010 06:17 PM
alphawolf88
2nd Generation S-series (1995-2005) Tech
1
03-18-2010 10:51 AM
Chrismacster
Steering, Suspension & Drivetrain
5
04-02-2009 06:57 PM