?? about broken swaybar link mount
Thread Starter
|
Super Member
Joined: Jan 2013
Posts: 1,110
From: KW Ontario
?? about broken swaybar link mount
just curious about these lower control arms that break off the sway bar link mount
Has anyone ever tried drilling the lower arm and using a moog k5252 or similiar link kit
Not sure if the angles would allow it
Some where in the Moog catelogue shows shorter and longer versions of a K5252
Has anyone ever tried drilling the lower arm and using a moog k5252 or similiar link kit
Not sure if the angles would allow it
Some where in the Moog catelogue shows shorter and longer versions of a K5252
Thread Starter
|
Super Member
Joined: Jan 2013
Posts: 1,110
From: KW Ontario
I was thinking for the cases where the mounting tab on the lower control arm has broken off
I just seen a picture of a lower control arm , It doesnt look like what I was thinking will work
I was thinking it might be possible to mount to the control arm like the RWD gm cars did
I just seen a picture of a lower control arm , It doesnt look like what I was thinking will work
I was thinking it might be possible to mount to the control arm like the RWD gm cars did
Last edited by rexazz2; Mar 19, 2013 at 05:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
armstrong001
Steering, Suspension & Drivetrain
6
Mar 19, 2013 08:27 AM
