Adjustable upper balljoints?
#1
Adjustable upper balljoints?
after installing adjustable balljoints in my friends Dodge ram i put a 6" lift in i got to thinking... these could come in handy to get the alignment right when i lower my jimmy. i found them for 2wd S-series (first and second gen) but cant seem to find them for 4x4. has anyone happend to stumble upon these for 4x4?
#3
it essentially puts a cam adjustment in between the mounting surface and the balljoint.
these are kinda similar to the ones i installed on the ram
the ones i saw for 2wd s10s were still the 4 bolt mount style with the cam below.
iif we could find ones availible to fit the 4x4s it could make torsion bar cranks doable without ruining the front end geometry. and tearing up parts.. seems cheaper than buying the rough country control arms. and could also help for lowering 4x4s like im looking into them for
these are kinda similar to the ones i installed on the ram
the ones i saw for 2wd s10s were still the 4 bolt mount style with the cam below.
iif we could find ones availible to fit the 4x4s it could make torsion bar cranks doable without ruining the front end geometry. and tearing up parts.. seems cheaper than buying the rough country control arms. and could also help for lowering 4x4s like im looking into them for
Last edited by chevyriders; 02-08-2021 at 12:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Brian Flannagan
Steering, Suspension & Drivetrain
4
10-25-2019 09:19 PM