Cranking torsion bars 1/2" or 1"
#1
Cranking torsion bars 1/2" or 1"
Will cranking my torsion bars 1/2-1 inch throw off my front end alignment alot? I just want it to sit level.
#2
RE: Cranking torsion bars 0.5-1"
it will change the angles yes...but how much its hard to say. Most shops will check your alignment for free...its worth doing. I cranked mine 1.5' and did not need an alignment...but thats probably because it was off before the crank, just the other direction..
#3
RE: Cranking torsion bars 0.5-1"
2 full turns got me a 1/2 inch...That sound about right??
#4
RE: Cranking torsion bars 0.5-1"
Yep. Its usually one full turn = .2-.25 inches.
Thread
Thread Starter
Forum
Replies
Last Post
beeneeb
2nd Generation S-series (1995-2005) Tech
1
12-07-2004 05:10 AM