Front drive shaft play on the transfer case
#1
Starting Member
Thread Starter
Join Date: Aug 2014
Location: Glendale, CA
Posts: 195

Hey guys
I finally got time to check out the clunking noise I had when putting the car in reverse.
What I found is that there is a play in the front drive shaft. Like I can wiggle it around with my hands. The play is at the bottom side where it attaches to the transfer case.
Is this common? Is there a way to fix it or do I have to get an entire drive shaft?
I finally got time to check out the clunking noise I had when putting the car in reverse.
What I found is that there is a play in the front drive shaft. Like I can wiggle it around with my hands. The play is at the bottom side where it attaches to the transfer case.
Is this common? Is there a way to fix it or do I have to get an entire drive shaft?
#2
New Member
Join Date: Jan 2014
Location: Ottawa
Posts: 75

with my experience its likely the cv joint in the front drive shaft that has play, no they are not a serviceable joint, best chance is a scrap yard and go around and find one with no play and make sure the boot is not ripped.
#3
Last edited by Captain Hook; 05-24-2015 at 08:52 PM.
#4
Starting Member
Thread Starter
Join Date: Aug 2014
Location: Glendale, CA
Posts: 195

so.. Im assuming it IS servicable since they are selling it as a separate part?
#5
Starting Member
Join Date: Feb 2021
Posts: 1

It's been a few years, but were you able to replace the CV joint, and did it fix the issue? I have a Buick Rainier with the same issue along with vibration the faster I go.
Thread
Thread Starter
Forum
Replies
Last Post
bertrenolds
1st Generation S-series (1983-1994) Tech
6
03-08-2012 09:17 AM
Chevy33
2nd Generation S-series (1995-2005) Tech
4
01-20-2011 12:03 AM
Numba1Sean
Steering, Suspension & Drivetrain
11
03-22-2009 09:40 AM
rdav99vfr
2nd Generation S-series (1995-2005) Tech
3
02-07-2007 09:05 PM






