Front Suspension Torque Spec.
#1
Front Suspension Torque Spec.
2005 S10 Blazer Base Model 2dr rwd 4.3
I am looking for torque specs. for front R/S lower control arm bushing nut & bolt to frame.
Also front R/S upper control arm bushing nuts [2]
Thanks in Advance
Ken
I am looking for torque specs. for front R/S lower control arm bushing nut & bolt to frame.
Also front R/S upper control arm bushing nuts [2]
Thanks in Advance
Ken
#2
My 2000 factory service manual says the lower control arm bushing nuts get torqued to 81 foot pounds. The upper control arm retaining nuts get 85 foot pounds. The torque specs. are the same for 2 and 4 wheel drive.
#3
Torque Specs.
Thanks for the info, is the torque specs. for the upper arm for the [2] bushing nuts or the [2] nuts and bolts [were the align. shims go] that attach it to the frame. I am looking for the [2] bushing nuts specs. Thanks Again
Thread
Thread Starter
Forum
Replies
Last Post
yuka42
1st Generation S-series (1983-1994) Tech
1
04-28-2014 07:45 PM
BlazerRaider
Engine & Transmission
0
06-02-2013 11:51 AM
2001Blazer4x4
2nd Generation S-series (1995-2005) Tech
1
03-02-2005 10:45 PM