Blazer Forum - Chevy Blazer Forums

Steering, Suspension & Drivetrain Questions about your steering, suspension, axles, and/or transfer case? Post up here.

Help

Thread Tools
 
Search this Thread
 
  #1  
Old 12-13-2014, 06:42 PM
Blazer1983's Avatar
Beginning Member
Thread Starter
Join Date: Dec 2014
Posts: 16
Blazer1983 is on a distinguished road
Default Help
Can anyone point me in the right direction to a thread with specs on what ZR2 parts are compatible with the LS 4x4 model. Thank you
 
Reply
  #2  
Old 12-13-2014, 06:56 PM
Captain Hook's Avatar
Moderator
Join Date: Mar 2009
Location: Belleville, Michigan
Posts: 8,453
Captain Hook is a jewel in the roughCaptain Hook is a jewel in the roughCaptain Hook is a jewel in the rough
Default
Frame, differentials, front half shafts, and torsion bars, are different. There are other differences, what specifically are you looking for?
 
Reply
  #3  
Old 12-14-2014, 11:50 AM
Blazer1983's Avatar
Beginning Member
Thread Starter
Join Date: Dec 2014
Posts: 16
Blazer1983 is on a distinguished road
Default
Well the torsion bars would be nice, then the skid plates.
 
Reply
  #4  
Old 12-14-2014, 08:05 PM
Captain Hook's Avatar
Moderator
Join Date: Mar 2009
Location: Belleville, Michigan
Posts: 8,453
Captain Hook is a jewel in the roughCaptain Hook is a jewel in the roughCaptain Hook is a jewel in the rough
Default
Skid plates will probably fit, torsion bars are not interchangeable. Rear springs and torsion bars are weaker on ZR2 for a more "flexible" ride.
 
Reply
Back to Subforum
Steering, Suspension & Drivetrain
View Next Unread
Replacing tie rods- length, spacing concern




Advanced Search

All times are GMT -5. The time now is 05:03 PM.