I just want a little bit.... (TBars)
#1
I just want a little bit.... (TBars)
With the addition of the T/A wheels I have gap, lol, alot of gap!
my question is... can I bring the nose of the truck down a little bit? the rear gap isnt bad because of how the fenders are, but for now until i get the cash together for 2inch blocks id love to find a way to get it at maximum 2 inches lower in front...
If the truck is uneven will that cause any "issue" with the AWD or anything else.
on the upside this truck grew new handling capabilities with these 245's
my question is... can I bring the nose of the truck down a little bit? the rear gap isnt bad because of how the fenders are, but for now until i get the cash together for 2inch blocks id love to find a way to get it at maximum 2 inches lower in front...
If the truck is uneven will that cause any "issue" with the AWD or anything else.
on the upside this truck grew new handling capabilities with these 245's
#2
It shouldn't cause any issues with the AWD. You can just loosen the torsion bar bolts in the front to drop it down. How much, who knows... Give it a try.
#3
Thank you very much. I dont expect a huge drop in front but between the 2 bravadas (the 98 i sold to my buddy and my 97) they have a bit of rearward lean anyway.
We thought mine had the butt squat because of the audio setup, but we compared the "unloaded" 98 and it sat nearly the same if not lower in the rear than mine did.
We thought mine had the butt squat because of the audio setup, but we compared the "unloaded" 98 and it sat nearly the same if not lower in the rear than mine did.
Thread
Thread Starter
Forum
Replies
Last Post
Dadatone
2nd Generation S-series (1995-2005) Tech
0
07-26-2012 12:28 PM
LucasMI
Steering, Suspension & Drivetrain
1
02-20-2012 11:50 AM