I'm changing my lower control arms on a 2000 Chevy blazer 4WD and I need to kno where exactly do I put the pully tool on tha torsion bar. I have pictures of where my spot is at.

 

if you are referring to the torsion bar unload tool then you place the tool over top and run tool bolt up into that small dimple in the key. Its right next to the key lock and adjusting bolt. hope that helps.

 

There are videos on the web on how to do this both properly and improperly. See one, do one, teach one

Be careful!

 

Thank you. Yes I'll be looking up on Google and YouTube for videos. I'm still sceptic I don't see tha dimple. Or tha key. I'll figure it out kuz that's tha best way. Thanks guys. More info would help too. This is my 1st big job. I've done spark plugs and a starter replacement but this takes tha cake but I'm confident.

 

Google images is a great thing