Is there a kit out there to put a blazer on bags and have it sit down?? if there is where and whats the process? Thanks

 

not that I have seen, pretty much have to do all the work yourself. sorry, I'm in the same place. wanting to bad my 4wd,but might just end up getting the belltech kit with torsion bar keys and blocks, might get leafs instead of the blocks tho

 

I heard something like u have to bore something out inorder to bag or hydro a 4x4 or something Like that.

 

I am also having that dilemma...bag or not! From what I heard, it CAN be done bagging a 4X4 but it is extensive work to the front, cutting, welding, etc...so I have opted to stick with the torsion key trick in front. For the back I heard it was a lot easier but again it would involve some cutting, notching, welding...so I got some 2" blocks and I installed a pair of Gabriel air shocks and when I take the air out of the shocks, I get about 4" lower in the back so I get about a 6" drop total in the back. It does look a bit weird when it's aired out but it's kinda cool. I get about 6" drop in back and about 2" in front (for now)...