where can i get a belltech lowering kit for a decent price for a 01 xtreme blazer? summit racing only shows 83-94 for an s-10 blazer... stylinconcepts isn't pullin anything up either...it is an s-10 blazer right? any input...thanx

 

There is no "kit" for Blazers, only parts available to lower your Blazer. Do not use S-10 drop spindles. Price will be like $110. They will not work with Blazers. Make sure you get Blazer drop spindles. Price will be like $250-$300.

Blazers have a sealed hub, that is why so expensive.

Go to stylinconcepts.com, enter in the year of your ride, then Suspension, then Lowering Parts. This will give you the parts available for your Blazer.

 

stylinconcepts FTW!!! they have just about everything u will need

 

I used a Bell Tech 2" dropped spindle and 3" blocks on my 2002 Xtreme. Now I have those spindles and a 1" spring and 3" blocks on my 2000. I'm changing to 2" springs and 1" blocks. Using this system you can use regular gas shocks in the front but you need shocks for a lowered suspension in the rear.

And..................the Extreme would scrap the front air damn on STEEP driveway exits. And the air damn is made of black rubber, the marks show up dramatically on school bus yellow!. On my regular LS the 2" spindles/1" springs haven't given me any problems. Trust me, you can go too low!.

And I put over 25,000 miles on the 02 Xtreme, I know whereof I speak.

And if you want aLORCLAS look, and his ride is 100% in my book, plan on bagging it, and THAT ain't cheap!.

 

I ordered all my kit from summit. They have blazer lowering spindles when you type in your specific vehicle. They were about 270 with their free shipping.

 

how low are you dropping it?