I need help asap!!!
#1
I need help asap!!!
Hey i wanted to know for the back of a chevy blazer ls 4dr 2003 would these rims fit on the back?
Wheel Diameter 17 in.
Wheel Width (in) 9.00 in.
Wheel Material Aluminum
Primary Wheel Color Black
Wheel Finish Gloss
Manufacturers Wheel Series American Racing Torq-Thrust M Series
Backspacing (in) 6.750 in.
Offset +45.00mm
Wheel Diameter 17 in.
Wheel Width (in) 9.00 in.
Wheel Material Aluminum
Primary Wheel Color Black
Wheel Finish Gloss
Manufacturers Wheel Series American Racing Torq-Thrust M Series
Backspacing (in) 6.750 in.
Offset +45.00mm
#2
Have you measured to see if you have 3/4" of clearance from the back side of your original rims/wheels??? That would be a quick way to verify that you may have clearance yourself and not wait for others to find the time to respond to you.
Please be patient and wait for responses. If you have not received a response after waiting at least 24 hours, it is permissible to 'bump' your original post by replying to it. Please DO NOT continue to post this same thing all over the forum. Such a habit is prohibited by forum rules and may result in the suspension of your privileges.
Please be patient and wait for responses. If you have not received a response after waiting at least 24 hours, it is permissible to 'bump' your original post by replying to it. Please DO NOT continue to post this same thing all over the forum. Such a habit is prohibited by forum rules and may result in the suspension of your privileges.
Thread
Thread Starter
Forum
Replies
Last Post
Mgiudice
1st Generation S-series (1983-1994) Tech
5
04-24-2011 11:03 PM
91BlazerTahoe
1st Generation S-series (1983-1994) Tech
2
02-16-2007 03:17 AM