So before I pull the trigger on these wheels. I have everything here for my truck but the wheels. 2 inch shackles slight tbar crank 2inch BL. I have a set of 31x10.50 a/t tires.

I want the wheels to be offset more then stock but nothing to wild. My plan is to run a 15x7 wheel with 3.75 inch backspacing. So if im correct that would put the offset at -6. Which would stick the tires out around almost 3 inches further than stock 4wd wheels. Is that correct?

Thanks for the help in advance.

 

My wheels are exactly those specs and yes, you can run a 31-1050 on them.

 

Thanks for the help man. That pic helps a lot. With that backspacing I am gonna get just the look I want with the wheel and tire combo.

 

These are 31's with 4" BS (0 offset). Yours will stick out just a little bit extra. Be sure to post pics once you get everything done

 

I will def post some pics up. Ill be taking pics of the progress of the truck and make a build thread shortly. Gonna wait for everything to arrive first. I ordered the body lift and wheels the other day. I already have the tires and shackles here. Today I doing lower ball joints and outer tie rod ends. After the lift goes on I have some plate metal and will start work on the off road front bumper as well as truck bed lining the out side and underneath of the truck.