Rim Width and Tire Width
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Ct
Posts: 292

I bought 15x8 Crager rims. What width tire should be used with a 8" wide rim?
#2
Super Member
Join Date: Jul 2009
Location: Oklahoma
Posts: 1,603

Well that is kinda hard to say, how big radius wise are you looking at for tires?
#3
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Ct
Posts: 292

33-34-35 I havn't decided yet.
#4
and just what are these 33's going to be riding under?
as for width...........stick with an 11"
as for width...........stick with an 11"
#5
Super Member
Join Date: Jul 2009
Location: Oklahoma
Posts: 1,603

yeah, tall skinny tires will ride like complete crap. So I would also say 11" would be a good size.
#6
BF Veteran
Join Date: Aug 2009
Location: Harrisburg PA
Posts: 3,133

thought most 33" tires and up were 12.5" wide
#7
Most tires are but you can get skinny ones like 33x10.50 and 32x11.50. Good for cutting thru mud, less rolling resistance. I thought about getting a set like that on some spare wheels for offroading alone. On 16 inch rims alot of people run 265/75 tires which are about 10.4 wide. You should be able to do the same with 15's.
But on 8 inch wide rims, some people do run a 12.50 width tire. But they tend to wear uneven and have some problems. A general rule of thumb I always heard was not to run tires more than 3 inches wider than the rims on a DD. Unless it's just a offroad machine only or a special situation like a drag car.
But on 8 inch wide rims, some people do run a 12.50 width tire. But they tend to wear uneven and have some problems. A general rule of thumb I always heard was not to run tires more than 3 inches wider than the rims on a DD. Unless it's just a offroad machine only or a special situation like a drag car.
Thread
Thread Starter
Forum
Replies
Last Post








