88 s10 blazer 4x4 engaging on its own.
#1
88 s10 blazer 4x4 engaging on its own.
Im having a problem with the 4x4 trying to engage itself in 2wd, when i slow down and come to a stop.The front axle display light blinks and i can hear the front end trying to engage.This all started when i used the 4x4 and then back to 2wd. Thanks for any suggestions!
#2
Sounds like you have a leaking vacuum switch on the transfer case that is allowing engine vacuum to pull on the front axle engagement actuator when it is in 2HI. The line to the actuator should be vented when in 2HI.
#3
Thank you for your help!
#4
No problem. Let us know what you find.
#5
Hello Swartlkk I have a question,im about to take off the vacuum switch and was wondering if the 3 hoses have to go back on the switch the same way?Does the switch know when to pull off each hose?
#6
#7
I have a new vacuum switch on order but now my air condioning only works on defrost.I have been reading up on your posts,very informitive!When i get the new switch will it correct the ac control also?Thanks swartlkk!
Thread
Thread Starter
Forum
Replies
Last Post
seriosbrad
2nd Generation S-series (1995-2005) Tech
6
11-07-2015 09:08 PM
jersey bob
Steering, Suspension & Drivetrain
7
10-31-2011 07:54 PM
Chevy604
Steering, Suspension & Drivetrain
0
09-05-2011 11:43 AM