1999 Blazer Door Hinges
#1
1999 Blazer Door Hinges
The right hand top door hinge (drivers door on RHD) is pulling away from the bodywork.
I have seen repair kits for the left hand door but not the right hand.
Do I have to remove existing hinge by drilling out the spot welds or can I repair by some other method?
I live in rural Normandy so sofisticated workshop equipment is rare.
Thanks in advance
I have seen repair kits for the left hand door but not the right hand.
Do I have to remove existing hinge by drilling out the spot welds or can I repair by some other method?
I live in rural Normandy so sofisticated workshop equipment is rare.
Thanks in advance
#3
Good Day! I own a unit that is LHD and noticed that when I first stole it that some body/fabrication shop was able to repair this same issue utilizing some basic ingenuity-and while it is not pretty and the welding burned the paint at that location,I was able to paint the scars and found that they actually did a permenent repair! Look into a local machinist! May save you some Euros! Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
Doubletap308
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
3
11-05-2009 09:15 PM
Doubletap308
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
1
10-30-2009 10:06 PM