O2 sensor on the...

Reply Subscribe

Thread Tools

Search this Thread

08-27-2010, 12:18 AM

blazerJim1701

Starting Member

Thread Starter

Join Date: Jul 2008

Posts: 209

blazerJim1701 is an unknown quantity at this point

O2 sensor on the...

right hand side will not come off.

The left came off fine but the right is tight as anything...

Any suggestions?

08-27-2010, 07:03 AM

Flatearthman

New Member

Join Date: Jun 2010

Posts: 87

rust penetrant and heat from a torch, patience and time.
if you crack it loose, tighten and loosen it.
one turn out a half a turn in till it unscrews all the way be generous with the rust penetrant also

08-27-2010, 09:47 AM

blazerJim1701

Starting Member

Thread Starter

Join Date: Jul 2008

Posts: 209

only problem is I don't have a torch.

I did put a lot of PB blaster, I mean I soaked it.

08-27-2010, 01:42 PM

LRV31

Starting Member

Join Date: Feb 2010

Posts: 139

Quote:

Originally Posted by blazerJim1701

I did put a lot of PB blaster, I mean I soaked it.

Get your hands on some AeroKroil. I've used PB for many years and always thought it was good until I used the AeroKroil.

08-29-2010, 03:21 PM

blazerJim1701

Starting Member

Thread Starter

Join Date: Jul 2008

Posts: 209

got it out with a breaker bar.

then installed new one with anti-sieze.

Thx all

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

CMP Sensor Relearn- Unable to find Required Sensor Support?

joey

2nd Generation S-series (1995-2005) Tech

08-27-2012 06:33 PM

Crank Sensor Relearn? Cam Sensor Adjust?

GM hater

2nd Generation S-series (1995-2005) Tech

01-09-2010 02:32 PM

Bank 1 sensor 2, O2 sensor

theeviltwinn

2nd Generation S-series (1995-2005) Tech

10-23-2009 06:37 AM

O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1)question..

daniel010

Engine & Transmission

02-02-2009 06:50 AM

Vapor pressure sensor/Fuel Tank Pressure sensor?

Spartan66

2nd Generation S-series (1995-2005) Tech

07-11-2008 02:34 PM