'02 Blazer heater fan only works on 2 and 3
#1
01-09-2012, 04:55 PM
'02 Blazer heater fan only works on 2 and 3
but not 1 and 4??? any ideas guys???
#2
01-09-2012, 05:03 PM
sounds like blower motor resistor...it mounts just to the right of the blower motor if your standing in front of truck.
if you do a search on it you may find a how to and some info to verify before buying a part.
if you do a search on it you may find a how to and some info to verify before buying a part.
#4
01-09-2012, 06:40 PM
Hi doesn't go through the resistor.
Check your underhood fuses, there's a 30a for just high speed. And a relay that's actuated in "4".
Not running in "1" would be the resistor
That or the speed switch is faulty
Check your underhood fuses, there's a 30a for just high speed. And a relay that's actuated in "4".
Not running in "1" would be the resistor
That or the speed switch is faulty
Thread
Thread Starter
Forum
Replies
Last Post
Maxboost25psi
General Chat
2
03-04-2013 12:22 PM
dconnor.cfh
2nd Generation S-series (1995-2005) Tech
4
04-07-2012 10:48 AM
STARMAN
Paint, Body, & Interior
18
03-30-2011 05:26 PM
rsterrn
2nd Generation S-series (1995-2005) Tech
7
11-15-2010 08:53 AM
