2000 chevy blazer brake problem help me!!!

Closed Thread Subscribe

Thread Tools

Search this Thread

01-01-2011, 03:43 PM

cementman

Starting Member

Thread Starter

Join Date: Jan 2011

Posts: 1

2000 chevy blazer brake problem help me!!!

Put brakes all around, new calipers. rotors, master cylinder and bleed brakes all around brake pedal still goes to the floor. Anyone have any suggestions please!!!!

01-01-2011, 03:51 PM

swartlkk

Administrator

Join Date: May 2005

Location: Waterloo, NY

Posts: 41,173

There is still air in the system.

01-02-2011, 07:46 AM

vegie_2

New Member

Join Date: Feb 2010

Location: Palm Bay, Fl

Posts: 80

did you bench bleed master before installing? if you did it could be a bad master

01-02-2011, 05:32 PM

LannyL81

Super Member

Join Date: Oct 2008

Location: Tucson, Arizona

Posts: 1,758

Bench bleeding the master is required. You can try doing this on the vehicle...bit messy though. Cover off and very short travel of the rod...like 1/8 inch....watch for small bubbles to appear.