2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

7-5/8 or 8.5" ring gear?

Old Jan 16, 2012 | 02:38 PM
  #1  
_HeC_'s Avatar
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
_HeC_ is on a distinguished road
Default

so im in need of a axle shaft for my 99 jimmy with a 2005 GU6 G80 rearend, anyone know what size the ring gear would be on it? do the 8.5s only come on ZR2 models?

a friend sent me this link
New Page 1

i didnt take a tape measure to my cover but it does have the pointed ears on the bottom of the housing just like GMs 7.5 and 7.625 rear ends

my rear end


safe to say its the 7-5/8ths?
 

Last edited by swartlkk; Jan 16, 2012 at 04:17 PM. Reason: *Combining Consecutive Posts* - Please use the edit function to add additional information in your post if another member has yet to respond.
Old Jan 16, 2012 | 04:34 PM
  #2  
step66's Avatar
Senior Member
Joined: Sep 2008
Posts: 733
From: Snow Hill MD
step66 is an unknown quantity at this point
Default

You have the 8.5 ring gear in that axle,I believe as that rear cover shot is identical to my GU6 without the limited slip! I have actually never seen a Blazer/Jimmy w/o the 8.5 gear! Ever! Just my input-step66
 
Old Jan 16, 2012 | 04:37 PM
  #3  
swartlkk's Avatar
Administrator
Joined: May 2005
Posts: 41,334
From: Waterloo, NY
swartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond repute
Default

There are FAR more 7.625" rear s-series trucks than 8.5". The 8.5" was only offered in the ZR2 (all of them) and a few 5-spd 4wd 2dr models (but not all). Everything else got the 7.625" rear.

step66, it is likely that you have only seen Blazer's with the 7.625 and not the 8.5.
 
Old Jan 17, 2012 | 04:12 PM
  #4  
_HeC_'s Avatar
Thread Starter
|
Starting Member
Joined: Sep 2011
Posts: 100
From: London ON
_HeC_ is on a distinguished road
Default

thanks swartlkk

every junkyard in my city refuses to sell me a axle shaft, they only sell the entire housing complete but i found 1 just outside my city that im gonna grab tomorrow afterwork! got a 2hr round trip to get this stupid thing lol
 
Old Jan 17, 2012 | 05:16 PM
  #5  
dimone545's Avatar
Junior Member
Joined: Sep 2008
Posts: 385
From: Bakersfield, ca
dimone545 is an unknown quantity at this point
Default

If that's the case in the rear is it safe for me to assume the front is the same?
 
Old Jan 17, 2012 | 05:22 PM
  #6  
step66's Avatar
Senior Member
Joined: Sep 2008
Posts: 733
From: Snow Hill MD
step66 is an unknown quantity at this point
Default

Hey swartlkk! You may be right! Just my experience with a 96 & 97 with the tow package and a GU6 has always been 8.5 ring! At least in the units I have owned. Sorry if I spoke out of line...step66
 
Old Jan 21, 2012 | 11:13 PM
  #7  
shawgf's Avatar
New Member
Joined: Feb 2010
Posts: 5
shawgf is on a distinguished road
Default

Originally Posted by swartlkk
There are FAR more 7.625" rear s-series trucks than 8.5". The 8.5" was only offered in the ZR2 (all of them) and a few 5-spd 4wd 2dr models (but not all). Everything else got the 7.625" rear.

step66, it is likely that you have only seen Blazer's with the 7.625 and not the 8.5.
I have a 2003 two door five speed. I just did and oil service on it and it has the round cover 8.5" ring gear. from what you say above does that mean I have the wide stance diff for the rear, or does that apply only to the front diff being wider? How much oil dose the 8.5" use?
 
Old Jan 22, 2012 | 04:27 PM
  #8  
step66's Avatar
Senior Member
Joined: Sep 2008
Posts: 733
From: Snow Hill MD
step66 is an unknown quantity at this point
Default

This is interesting as I spent some time in a salvage yard in DE yesterday-virtually all GU6 tow axles there had the 8.5 ring! Why do authorities make statements about the 7.625
when it doesn't seem to be true? Every Jimmy I have ever owned with the tow package had the 8.5! My experience only open to suggestions!
 
Old Jan 22, 2012 | 06:32 PM
  #9  
bigcountry58's Avatar
New Member
Joined: Jun 2011
Posts: 59
bigcountry58 is on a distinguished road
Default

you will need about 2 quarts of oil to fill the rear dif... I filled mine by the book with 1 quart drove around for awhile and found weeks later it was too low. I needed just shy of a 2nd bottle.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alesv
Steering, Suspension & Drivetrain
1
Apr 12, 2010 11:21 AM
ComputerNerdBD
2nd Generation S-series (1995-2005) Tech
12
Feb 28, 2010 11:30 AM
volfan4
Engine & Transmission
3
Nov 28, 2009 08:04 PM
midnightmekanik
2nd Generation S-series (1995-2005) Tech
8
Oct 8, 2009 08:32 PM
cide
2nd Generation S-series (1995-2005) Tech
12
Mar 23, 2009 10:57 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:40 PM.